Os recalques de uma fundação rígida quadrada sobre uma argila lacustre [1] são calculados com o RFEM. Um quarto da fundação é modelado. A fundação tem uma largura de 75,0 m em ambos os lados. As fases de construção são utilizadas para gerar os resultados.
Uma secção em Z está completamente fixada na extremidade e carregada por um binário que, no caso de um modelo em casca, é representado por um par de forças de corte. Determine a tensão axial no ponto A (no meio da superfície). O problema é definido de acordo com os critérios de referência "The Standard NAFEMS Benchmarks".
O exemplo de verificação descreve cargas de vento em várias direções do vento num modelo de um grupo de edifícios. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
O exemplo de verificação descreve as cargas de pressão nas paredes do edifício em disposição tandem ao nível do solo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Uma membrana é esticada através de um pré-esforço isotrópico entre dois raios de dois cilindros concêntricos que não se encontram num plano paralelo ao eixo vertical. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Uma membrana cilíndrica é esticada utilizando pré-esforço isotrópico. Find the final minimal shape of the membrane - catenoid. Determine the maximum radial deflection of the membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Uma membrana esférica de balão é preenchida com gás com pressão atmosférica e volume definido (estes valores são utilizados apenas para a definição do modelo de EF). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
A thin circular ring of a rectangular cross-section is exposed to external pressure. Determine a carga crítica e o fator de carga correspondente para a encurvadura no plano.
Um recipiente cónico de parede fina está cheio de água. Thus, it is loaded by hydrostatic pressure. While neglecting self-weight, determine the stresses in the surface line and circumferential direction. The analytical solution is based on the theory of thin-walled vessels. This theory was introduced in Verification Example 0084.
Uma estrutura de cobertura em casca sujeita a compressão e com as bordas retas livres é modelada enquanto os deslocamentos y e z são limitados nos cantos curvados. Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
Um recipiente esférico de parede fina é sujeito a compressão interna. While neglecting self‑weight, determine the von Mises stress and the radial deflection of the vessel.